DURKOPP ADLER 767-AE-5-73 사용 설명서 - 페이지 9

{카테고리_이름} DURKOPP ADLER 767-AE-5-73에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER 767-AE-5-73 16 페이지. Converting bobbin hook clb 300

페이지 인쇄

Umbauanleitung für Bobbinengreifer CLB 300

Instructions for converting bobbin hook CLB 300

General information

1.1

Scope of delivery

Conversion

2.1

Disassembling the components / Inserting the bobbin

2.1.1

Class: 767-FAS-573

Änderungsindex

Ausgabe/Edition:

03.2007

Rev. index: 0.0

767-FAS-573 & 767-AE-5-73

A conversion to the bobbin hook CLB 300 is possible with the

class 767-FAS-573 and 767-AE-5-73.

With class 767-AE-5-73 machines, delivered before January 1st,

2007, the rigid foot 0767 220143 (01.0) must be used.

On request: Slide 0767 140143 with sight glass for thread monitoring.

Before proceeding with the conversion task:

Please make sure that you have all components of the kit.

The complete kit for the transformation of the bobbin hook with the

order no.: 0767 150754 consists of the following components:

1x Hook

1x Manual

On request

1x Slide (with sight glass)

Attention! Risk of injury !

Turn the main switch off and remove the plug before starting

the conversion.

The transformation may only be performed by qualified

technicians.

–

Remove the slide.

–

Remove the counter knife.

–

Remove the thread-pulling knife.

–

Remove the throat plate.

–

Feed dog; remove the front screw and push it to the side.

–

Loosen the hook fastening screws and remove the hook.

–

Insert the CLB-hook, tighten the fastening screws (first

screw in the direction of rotation on the flat spot).

Printed in Germany

Teile-Nr./ Part-No.:

0791 767774

0767 150754

0791 767774

0767 140143

Blatt: 9

von 16

Sheet:

from