DURKOPP ADLER 867 Istruzioni aggiuntive - Pagina 8

Sfoglia online o scarica il pdf Istruzioni aggiuntive per Accessori per macchine da cucire DURKOPP ADLER 867. DURKOPP ADLER 867 20. Remaining thread monitor
Anche per DURKOPP ADLER 867: Manuale di istruzioni (16 pagine), Istruzioni (4 pagine), Manuale di istruzioni (16 pagine), Manuale di istruzioni (8 pagine), Istruzioni aggiuntive (18 pagine)

2.1 Assembling the remaining thread monitor

Fig. 1: Assembling the remaining thread monitor (1)

(1) - Remaining thread monitor

(2) - Hose

To assemble the remaining thread monitor:

1. Remove old bobbin case and replace it with the new bobbin case from

2. Tighten the pre-assembled carriers (4) using the screws (3).

3. Connect the hose (2) used for the blow-off.

Assembling the remaining thread monitor

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Switch off the machine before assembling the

residual thread monitor.

①

②

③

④

the kit.

As a rule, the front edge of the remaining thread monitor (1) must be

assembled parallel to the front edge of the carrier (4).

Assembling the remaining thread monitor

(3) - Screws

(4) - Carrier

Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018

③

①

②

①