DURKOPP ADLER 867 Dodatkowe instrukcje - Strona 8

Przeglądaj online lub pobierz pdf Dodatkowe instrukcje dla Akcesoria do maszyn do szycia DURKOPP ADLER 867. DURKOPP ADLER 867 20 stron. Remaining thread monitor
Również dla DURKOPP ADLER 867: Instrukcja obsługi (16 strony), Instrukcje (4 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (8 strony), Dodatkowe instrukcje (18 strony)

2.1 Assembling the remaining thread monitor

Fig. 1: Assembling the remaining thread monitor (1)

(1) - Remaining thread monitor

(2) - Hose

To assemble the remaining thread monitor:

1. Remove old bobbin case and replace it with the new bobbin case from

2. Tighten the pre-assembled carriers (4) using the screws (3).

3. Connect the hose (2) used for the blow-off.

Assembling the remaining thread monitor

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Switch off the machine before assembling the

residual thread monitor.

①

②

③

④

the kit.

As a rule, the front edge of the remaining thread monitor (1) must be

assembled parallel to the front edge of the carrier (4).

Assembling the remaining thread monitor

(3) - Screws

(4) - Carrier

Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018

③

①

②

①