DURKOPP ADLER 867 Dodatkowe instrukcje - Strona 10
Przeglądaj online lub pobierz pdf Dodatkowe instrukcje dla Akcesoria do maszyn do szycia DURKOPP ADLER 867. DURKOPP ADLER 867 20 stron. Remaining thread monitor
Również dla DURKOPP ADLER 867: Instrukcja obsługi (16 strony), Instrukcje (4 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (8 strony), Dodatkowe instrukcje (18 strony)
Drukuj stronę
Fig. 3: Connecting the remaining thread monitor on Classic machines (2)
(4) - Cable clamps
4. Fasten the cables with the cable clamps (4) to the base plate of the
5. Screw the remaining thread monitor carrier plate (1) with the circuit
Fig. 4: Connecting the remaining thread monitor on Classic machines (3)
(6) - Cable
6. Route the cable (6) through the cable holder (7) in the machine arm:
7. Connect the cable (6) to plug connection X24 of the valve circuit board.
8. Guide the cables of the remaining thread monitors through the holes
8
④
remaining thread monitor control.
board (2) into the base plate using the screws (5).
⑥
from the remaining thread monitor control to the valve circuit board.
in the base plate and fix them to the existing cables with cable tie.
Assembling the remaining thread monitor
⑤
(5) - Screw
⑦
(7) - Cable holder
Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018
X24