- ページ 10

ミシンアクセサリー DURKOPP ADLER 867のPDF 補足説明をオンラインで閲覧またはダウンロードできます。DURKOPP ADLER 867 20 ページ。 Remaining thread monitor
DURKOPP ADLER 867 にも：取扱説明書 (16 ページ), 使用方法 (4 ページ), 取扱説明書 (16 ページ), 取扱説明書 (8 ページ), 補足説明 (18 ページ)

ページを印刷する

Fig. 3: Connecting the remaining thread monitor on Classic machines (2)

(4) - Cable clamps

4. Fasten the cables with the cable clamps (4) to the base plate of the

5. Screw the remaining thread monitor carrier plate (1) with the circuit

Fig. 4: Connecting the remaining thread monitor on Classic machines (3)

(6) - Cable

6. Route the cable (6) through the cable holder (7) in the machine arm:

7. Connect the cable (6) to plug connection X24 of the valve circuit board.

8. Guide the cables of the remaining thread monitors through the holes

④

remaining thread monitor control.

board (2) into the base plate using the screws (5).

⑥

from the remaining thread monitor control to the valve circuit board.

in the base plate and fix them to the existing cables with cable tie.

Assembling the remaining thread monitor

⑤

(5) - Screw

⑦

(7) - Cable holder

Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018

X24