DUROFIX RZ4012 Manuale informativo - Pagina 13

Sfoglia online o scarica il pdf Manuale informativo per Utensile elettrico DUROFIX RZ4012. DUROFIX RZ4012 17. Oil pulse tool

When you turn to a suitable position, take away the Allen key then push the

forward/reverse lever to forward position, use the following torque meter to check

the torque.

If the torque is not your target torque. Repeat the step 2 and step 3, until the torque

reach your target torque.

FASTENING

In normal fasten the bolts, when the tighten torque reach pre-set torque, the LED green

lamp will light and auto shut off.

Notes:

Fastening torque does not reach pre-set torque if you release trigger prior to

automatic shut off.

Do not cover slit when the tool is in use. Doing so will restrict tool ventilation

Temperature protection. The tool will stop rotation with shut off LED red lamp

lighting when the temperature gets high. Do not use the tool for approximately 30

minutes. Confirm the temperature has cooled. Restart after the temperature has

reached room temperature.

NOTE

Continuous use in two speed range is not recommended. It may damage

Fig. 3

Fig. 4