DUROFIX RZ4012 Manuale informativo - Pagina 14

Sfoglia online o scarica il pdf Manuale informativo per Utensile elettrico DUROFIX RZ4012. DUROFIX RZ4012 17. Oil pulse tool

Stampa la pagina

the switch and should be avoided.

NOTE

When change the position of the forward/reverse lever, making sure the

EC switch is released.

NOTE

The first time the tool is run after changing the direction of rotation, you

may hear a click on start up. This is normal and does not indicate a problem.

Troubleshooting

Check the following before you ask for repair

Situation

Tools Gets Hot

Battery Pack Temperature is

Too High

Battery Pack Temperature is

Too Low

Battery Pack Voltage is Too

Low

Over Current Protection

Fasten torque not reach setting

#1 Press Trigger without

#2 Pulse Unit is Too Hot to

Shutoff over 5 Sec Fastening

Hydraulic Oil Changing Alert

Setting Torque Reached and

Motor Shut-off Right Away

LED Indicator

RED Steady

Green Blinking

RED Blinking

Green Steady

RED Steady

RED & Green Blinking

Alternatively

RED & Green Blinking

Simultaneously

Green Blinking for 3 Sec

(If no use lasting 3 min, alert

signal will blink again once

pressing the trigger.)

Green Steady

Troubleshooting

Rest the Tool to Room

Temperature

Rest the Battery Pack to Room

Temperature or Change Battery

Pack,

Rest the Battery Pack to Room

Temperature or Change Battery

Pack,

Change Battery Pack and

Charge the Used Pack

Abnormal Shutoff

Release Trigger, then Re-

tightening

Abnormal Shutoff

Release Trigger, then Re-

tightening

Contact Service Centre to

Replace Oil

Normal Shutoff