DataBay AVE-301T Manuale d'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale d'uso per Estensore DataBay AVE-301T. DataBay AVE-301T 15. Vga and audio cat-x av extender
Anche per DataBay AVE-301T: Manuale d'uso (11 pagine), Manuale d'uso (16 pagine)
Stampa la paginaPlug two ends of UTP cable to Transmitter and Receiver's RJ45 SYSTEM LINK
ports, the Receiver's connected monitor and speaker should work now and the
LEDs above RJ-45 port should remain ON. You can adjust the "FOCUS" and
"GAIN" control of Receiver to have the best VGA display.
(5) Function Test: After above installation, you will be able to broadcast the
AV signal to Receiver's connected monitor and speaker.
(6) Problem and Solving: If you find unstable image or audio problems after
installation, please confirm following list or contact your direct vendor for
further assistance:
a. Check if PC's VGA resolution and frequency over the limit of monitor
display, if so, please change the VGA configuration from Windows
Control panel.
b. Try to connect Monitor and speaker directly to a PC, and ensure the
basic function of these devices.
c. When using LCD or same type monitor, there might have some image
offset or blinking, please adjust the position, clock or phase of the LCD
monitor, or simply press Auto Adjust / Tune to have a better image
solution.
5.3 AVE-300 Multi-Port Model: Installation and Operation:
(1) Site Selection: In your first time installation, place Transmitter near the
PC or AV devices; you can use rack mounting kit to fix the system box.
(2) Connecting Monitor and Speaker: Plug power adapter to the Transmitter
and connect monitor and speaker to "VGA/AUDIO OUT" port. The POWER
LED will turn on green to indicate the POWER ON status and "ACTIVE" LEDs
should turn off to indicate the unconnected status.
and audio cables to connect the signal from your AV device to the
"VGA/AUDIO IN" port of Transmitter box.
VGA and Audio CAT-5 AV Extender
Rack Mounting Kit for
Multi-Port Unit
11 / 15
Then, prepare VGA