DataBay AVE-301T Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DataBay AVE-301T. DataBay AVE-301T 15 pagina's. Vga and audio cat-x av extender
Ook voor DataBay AVE-301T: Gebruikershandleiding (11 pagina's), Gebruikershandleiding (16 pagina's)

Pagina afdrukken

Plug two ends of UTP cable to Transmitter and Receiver's RJ45 SYSTEM LINK

ports, the Receiver's connected monitor and speaker should work now and the

LEDs above RJ-45 port should remain ON. You can adjust the "FOCUS" and

"GAIN" control of Receiver to have the best VGA display.

(5) Function Test: After above installation, you will be able to broadcast the

AV signal to Receiver's connected monitor and speaker.

(6) Problem and Solving: If you find unstable image or audio problems after

installation, please confirm following list or contact your direct vendor for

further assistance:

a. Check if PC's VGA resolution and frequency over the limit of monitor

display, if so, please change the VGA configuration from Windows

Control panel.

b. Try to connect Monitor and speaker directly to a PC, and ensure the

basic function of these devices.

c. When using LCD or same type monitor, there might have some image

offset or blinking, please adjust the position, clock or phase of the LCD

monitor, or simply press Auto Adjust / Tune to have a better image

solution.

5.3 AVE-300 Multi-Port Model: Installation and Operation:

(1) Site Selection: In your first time installation, place Transmitter near the

PC or AV devices; you can use rack mounting kit to fix the system box.

(2) Connecting Monitor and Speaker: Plug power adapter to the Transmitter

and connect monitor and speaker to "VGA/AUDIO OUT" port. The POWER

LED will turn on green to indicate the POWER ON status and "ACTIVE" LEDs

should turn off to indicate the unconnected status.

and audio cables to connect the signal from your AV device to the

"VGA/AUDIO IN" port of Transmitter box.

VGA and Audio CAT-5 AV Extender

Rack Mounting Kit for

Multi-Port Unit

11 / 15

Then, prepare VGA