Durr EcoGun 615 Manuale di funzionamento e manutenzione - Pagina 6

Sfoglia online o scarica il pdf Manuale di funzionamento e manutenzione per Spruzzatore di vernice Durr EcoGun 615. Durr EcoGun 615 20. Automatic air spraying gun

Stampa la pagina

EcoGun 615

» The atomizing inlet air supplied by the PU hose of diameter

» The control air supplied by the PU hose of diameter 6.0x4,0mm

» The atomizing air (A) is controlled by the mechanical regulation

» The wind-vane air (K) is controlled by mechanical regulation

USE

The EcoGun 615 automatic spraying gun is designed to the

surface treatment of the product by air spraying. The nozzle system

is designed to pressure supply of the applied material. It is suitable

for spraying of the coating materials, however it can be used also for

spraying of other materials, which composition does not adversely

affect the material of the spraying gun. As the coating material path

is made from stainless material, incl. stainless nozzle system, the

gun can be used for almost all applicable materials. In relation to

type of the NH, it is possible for fit the pin seal from PTFE (pos.

12, 13, 14, 15) or from graphite (pos. 16, 17, 18) for particularly

abrasive materials. The gun is designed to remote control with

separated supply of air for the gun control and for the spraying itself

(atomizing). Amount of the material and beam shape (flat or round)

can be controlled directly on the gun.

For full automatic operation the automatic guns can be optionally

fitted by devices for automatic control and programming of the

spraying width („K" air automatic control, pos. 34, 35). In this case

all advantages of the automatic spraying gun are used.

a hole for clamping to the handling unit of diameter 10 mm;

clamping to the handling unit of diameter 8 mm is achieved by

the hole in the gun body by fixing socket head screws 3 mm.

Opening of outlet of the applied material and atomizing air is

achieved by a pneumatic cylinder in the gun body.

8.0x6.0mm mm is controlled by the pressure air regulator and

closed / opened by stroke of the gun piston.

is separately controlled by means of the three-way solenoid

valve. The gun opens by supply of the control air before the

piston. The gun closes by releasing the air before the piston to

atmosphere.

adjusting the atomizing of the pressure supplied NH.

adjusting the beam shape (flat or round). After mounting of the

fitting for automatic supply of the wind-vane air with a coupling

(not part of the supply, pos. 34, 35), the air can be remotely

controlled through the air control by means of the two-way

solenoid valve.