Durr EcoGun 615 Instrukcja obsługi i konserwacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Rozpylacz farby Durr EcoGun 615. Durr EcoGun 615 20 stron. Automatic air spraying gun
Drukuj stronęEcoGun 615
» The atomizing inlet air supplied by the PU hose of diameter
» The control air supplied by the PU hose of diameter 6.0x4,0mm
» The atomizing air (A) is controlled by the mechanical regulation
» The wind-vane air (K) is controlled by mechanical regulation
USE
The EcoGun 615 automatic spraying gun is designed to the
surface treatment of the product by air spraying. The nozzle system
is designed to pressure supply of the applied material. It is suitable
for spraying of the coating materials, however it can be used also for
spraying of other materials, which composition does not adversely
affect the material of the spraying gun. As the coating material path
is made from stainless material, incl. stainless nozzle system, the
gun can be used for almost all applicable materials. In relation to
type of the NH, it is possible for fit the pin seal from PTFE (pos.
12, 13, 14, 15) or from graphite (pos. 16, 17, 18) for particularly
abrasive materials. The gun is designed to remote control with
separated supply of air for the gun control and for the spraying itself
(atomizing). Amount of the material and beam shape (flat or round)
can be controlled directly on the gun.
For full automatic operation the automatic guns can be optionally
fitted by devices for automatic control and programming of the
spraying width („K" air automatic control, pos. 34, 35). In this case
all advantages of the automatic spraying gun are used.
6
a hole for clamping to the handling unit of diameter 10 mm;
clamping to the handling unit of diameter 8 mm is achieved by
the hole in the gun body by fixing socket head screws 3 mm.
Opening of outlet of the applied material and atomizing air is
achieved by a pneumatic cylinder in the gun body.
8.0x6.0mm mm is controlled by the pressure air regulator and
closed / opened by stroke of the gun piston.
is separately controlled by means of the three-way solenoid
valve. The gun opens by supply of the control air before the
piston. The gun closes by releasing the air before the piston to
atmosphere.
adjusting the atomizing of the pressure supplied NH.
adjusting the beam shape (flat or round). After mounting of the
fitting for automatic supply of the wind-vane air with a coupling
(not part of the supply, pos. 34, 35), the air can be remotely
controlled through the air control by means of the two-way
solenoid valve.