DataLocker Sentry K300 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Tastiera DataLocker Sentry K300. DataLocker Sentry K300 10. Encrypted keypad mssd with oled screen
Anche per DataLocker Sentry K300: Manuale d'uso (19 pagine), Manuale del recensore (10 pagine)

Stampa la pagina

be turned off without contacting ([email protected]). Caution should be exercised,

making sure SafeConsole is needed before making this selection.

4. If the Sentry K300 was previously conﬁgured with both an admin and user password, the user

password will be disabled after clicking Update. . . . This means that the End User will need to

use the admin password to unlock the device.

5. After the update is successful, the K300 will shut down. If the K300 does not turn back on after

30 seconds, press the power button on the device for roughly 3 seconds. The K300 can now

be given to the End User to register to SafeConsole. If the password for the device is still the

default of 1234567, the user will be forced to change the password on the device's 4th unlock

after initialization.

Option 2: Enable SafeConsole From The Sentry K300 Device Menu

These steps can be used to enable SafeConsole if the Sentry K300 is already on ﬁrmware version 1.19

or greater, either directly from the factory, or after performing a device update without selecting

Enable SafeConsole. These steps can also be performed by the End User.

1. Authenticate on the K300 keypad using the admin password, default 1234567.

2. In the Connection menu, select MENU.

3. In the main menu select SAFECONSOLE.

4. In the SafeConsole Menu select ENABLE.

5. Return back to the connection menu.

Note: Enabling SafeConsole directly in the device menu will lock the K300 into SafeConsole mode

after registration is complete.

Sentry K300 SafeConsole Deployment guide