DataLocker Sentry K300 배포 매뉴얼 - 페이지 4

{카테고리_이름} DataLocker Sentry K300에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataLocker Sentry K300 10 페이지. Encrypted keypad mssd with oled screen
DataLocker Sentry K300에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 검토자 매뉴얼 (10 페이지)

페이지 인쇄

be turned off without contacting ([email protected]). Caution should be exercised,

making sure SafeConsole is needed before making this selection.

4. If the Sentry K300 was previously conﬁgured with both an admin and user password, the user

password will be disabled after clicking Update. . . . This means that the End User will need to

use the admin password to unlock the device.

5. After the update is successful, the K300 will shut down. If the K300 does not turn back on after

30 seconds, press the power button on the device for roughly 3 seconds. The K300 can now

be given to the End User to register to SafeConsole. If the password for the device is still the

default of 1234567, the user will be forced to change the password on the device's 4th unlock

after initialization.

Option 2: Enable SafeConsole From The Sentry K300 Device Menu

These steps can be used to enable SafeConsole if the Sentry K300 is already on ﬁrmware version 1.19

or greater, either directly from the factory, or after performing a device update without selecting

Enable SafeConsole. These steps can also be performed by the End User.

1. Authenticate on the K300 keypad using the admin password, default 1234567.

2. In the Connection menu, select MENU.

3. In the main menu select SAFECONSOLE.

4. In the SafeConsole Menu select ENABLE.

5. Return back to the connection menu.

Note: Enabling SafeConsole directly in the device menu will lock the K300 into SafeConsole mode

after registration is complete.

Sentry K300 SafeConsole Deployment guide