elsner elektronik KNX LW sl Specifiche tecniche e istruzioni per l'installazione - Pagina 8
Sfoglia online o scarica il pdf Specifiche tecniche e istruzioni per l'installazione per Accessories elsner elektronik KNX LW sl. elsner elektronik KNX LW sl 13. Brightness and wind sensor
Stampa la pagina
Cable guide
Rubber
gasket
Drilling plan
ATTENTION! The printout of the data sheet does not have original size! A separate, di-
mensionally correct drilling plan is included ex works and this can be used as a tem-
plate.
Brightness and Wind Sensor KNX LW sl • Status: 05.11.2014 • Errors excepted. Subject to technical changes.
8
Fig. 9 a+b
a) If the power lead is to be hidden when in-
stalled, it must emerge from the wall in
the vicinity of the rear of the housing
(marked area).
b) If the power lead is to be surface-mount-
ed, the cable guide is broken off. The lead
is then fed into the device at the under-
side of the housing.
Fig. 10
Feed the power lead through the rubber gas-
ket.
Installation and start-up