ADE EHR1 Manuale operativo - Pagina 14
Sfoglia online o scarica il pdf Manuale operativo per Bilance ADE EHR1. ADE EHR1 20. Platform scale
Stampa la pagina
Faults and Messages
Message
1.0
2.0
3. Ad
4. Ad
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
Hold
TARA
13.0
ZERO
14.0
15.0
16.0
17.0
18.0
Disposal
Old electronic devices and batteries are not domestic waste.
Please dispose defective respectively old devices and batteries according to
the legal and country-specific regulations!
Make sure that only discharged batteries respectively batteries with isolated
poles will be disposed otherwise short-circuit may occur!
Storage- and transport terms
Keep all original cartons and parts of the packing for an eventual necessary send back in order
to avoid any possible damage during the transport.
Disconnect all cables before transport to avoid unnecessary damages.
13
Description
Zero point is over adjusted range
Zero is under adjusted range
ADC is over max. range
ADC is under min. range
Weight indication is too high
Weight indication is too low
No access to EEPROM
Parameters are not identical with backup data
Parameter/s is/are not within the normal range
Calibration point of scale (0 can accept different values)
Calibration error
Hold function is active
◄
Tare function is active
◄
Scale is „Exact Zero"
Setting of full capacity will be indicated
Division will be displayed
-
Parameter
=1-9
Battery voltage is less 4,7 Volt
. --
= value of 01-99
EHR_EHQ-210517-Rev009-UM-en