ADE EHR1 운영 매뉴얼 - 페이지 14
{카테고리_이름} ADE EHR1에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE EHR1 20 페이지. Platform scale
페이지 인쇄
Faults and Messages
Message
1.0
2.0
3. Ad
4. Ad
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
Hold
TARA
13.0
ZERO
14.0
15.0
16.0
17.0
18.0
Disposal
Old electronic devices and batteries are not domestic waste.
Please dispose defective respectively old devices and batteries according to
the legal and country-specific regulations!
Make sure that only discharged batteries respectively batteries with isolated
poles will be disposed otherwise short-circuit may occur!
Storage- and transport terms
Keep all original cartons and parts of the packing for an eventual necessary send back in order
to avoid any possible damage during the transport.
Disconnect all cables before transport to avoid unnecessary damages.
13
Description
Zero point is over adjusted range
Zero is under adjusted range
ADC is over max. range
ADC is under min. range
Weight indication is too high
Weight indication is too low
No access to EEPROM
Parameters are not identical with backup data
Parameter/s is/are not within the normal range
Calibration point of scale (0 can accept different values)
Calibration error
Hold function is active
◄
Tare function is active
◄
Scale is „Exact Zero"
Setting of full capacity will be indicated
Division will be displayed
-
Parameter
=1-9
Battery voltage is less 4,7 Volt
. --
= value of 01-99
EHR_EHQ-210517-Rev009-UM-en