CBM SST 1700B Installazione e primo utilizzo - Pagina 3

Sfoglia online o scarica il pdf Installazione e primo utilizzo per Apparecchiature di laboratorio CBM SST 1700B. CBM SST 1700B 4. Steam sterilizer

Open the door by pressing the OPEN DOOR key

Remove from the chamber the given accessory

1. Provide for a container with at least 3 litres of DEMINERALIZED water, see also the

table on User Manual

WARNING: the use of ordinary water causes damages and malfunctions of the

appliance in a short time and invalidates its warranty.

2. Fit the appropriate hosepipe (supplied) by pressing the pipe-fitting onto the blue/white

"Fill Clean Water Tank" coupling on the left.

3. Place the other end of the hosepipe in the demineralized water making sure it touches

the bottom.

4. Press the Right direction

5. The tank holds a maximum of 3 litres of water; when the tank is full, FILLING will stop

automatically.

Should water in the container finish before the tank is full, please press the STOP

on the display.

6. When loading is completed the display shows the operation end, press STOP and ESC

to go back to the main pages

7. Disconnect the hosepipe by pressing the Blue button on the pipe-fitting and pulling the

coupling slightly.

Rev. 00 – 06/08/2014

C.B.M. S.r.l. a socio unico - Medical Equipment –

Via Castello 10, 26038 Torre dé Picenardi (CR) - Italy

OPEN DOOR

FILL CLEAN WATER

key on the display then press the Fill WATER key.

Installazione SST1700-2200 r0 EN.DOC

key

pag. 3 di 4