CBM SST 1700B Installazione e primo utilizzo - Pagina 4

Sfoglia online o scarica il pdf Installazione e primo utilizzo per Apparecchiature di laboratorio CBM SST 1700B. CBM SST 1700B 4. Steam sterilizer

1. After having introduced the material to be sterilized in the chamber, close the door to its

limit, then press the DOOR LOCK

the display

2. Select the desired cycle by pressing the relevant icon (example

cycles Table on the User manual.

3. Press the DRYING

information bar.

4. After having selected the DRYING cycle, press the START key.

5. From this moment the door is fully locked and the appliance operates automatically until

the end of the cycle.

6. If the cycle is completed successfully the appliance warns of the END of cycle through

sound impulses and the writing CYCLE COMPLETED on the display.

7. Upon completion of the cycle press the ENTER

the door by pressing the OPEN DOOR

8. Remove the material inside the chamber

Make attention to the hot temperature

Rev. 00 – 06/08/2014

C.B.M. S.r.l. a socio unico - Medical Equipment –

Via Castello 10, 26038 Torre dé Picenardi (CR) - Italy

STERILIZATION CYCLE

key, the icon DOOR LOCKED will appear on

key and select the drying cycle desired, also shown in the

Installazione SST1700-2200 r0 EN.DOC

key. It is now possible to open

key.

), see also the

pag. 4 di 4