4ms Company Spherical Wavetable Navigator Scheda informativa - Pagina 4
Sfoglia online o scarica il pdf Scheda informativa per Sintetizzatore 4ms Company Spherical Wavetable Navigator. 4ms Company Spherical Wavetable Navigator 4. Channels, vcos, navigation
Stampa la paginaSpheres Color Chart (Inner Light Ring)
Browse
Sphere
Spheres (factory)
Harmonics
Sine Distortions
Formants 1
Formants 2
Morphing Cello
Talkative FM
Distorted FM
909 Hits
Wavefolded Rings
Smooth Troughs
Alias Maximizer
Sine Sequences
Clearing/Resetting
Load a Blank Preset = Reset Everything
Turn the Preset knob to select a slot whose light is off. Tap the Preset
knob twice quickly to load the blank preset.
Clear/Reset LFOs
Press Preset + LFO Speed: Resets all speeds to 1Hz.
Press Preset + LFO Shape: Resets all shapes to Ramp-down.
Press Preset + LFO Shape + LFO Speed (2 seconds): Resets all LFO
settings.
Press LFO Speed + LFO Shape: Syncs LFO Phases by toggling
between in-phase and sequenced phase (each channel offset 60°).
Clear/Reset Oscillators
Press Preset + Transpose: Resets all transpositions and spread.
Press Preset + Fine + Transpose: Resets all fine tuning and detuning.
Press Preset + Octave: Resets all channels to the same octave.
Press Preset + Depth + Latitude: Resets all navigation.
Undo Load/Save/Clear Preset
Press Fine + Preset to undo/redo last preset action.
Push + Turn Browse
= Select Spherical Wavetable
Spheres (user)
User Spheres 1-18
User Spheres 19-36
User Spheres 37-54
User Spheres 55-72
User Spheres 73-90
User Spheres 91-108
Fine Adjustments
+
Fine + Turn knob
= Micro Adjustment
Fine
Fine+Transpose = Fine-tune pitch by micro-tonal steps.
Fine+Spread = Detune spread: all channels detune in
different amounts.
Fine+LFO Speed = Adjust speed continuously instead of
integer dividers/multipliers.
Fine+LFO Gain = Fine adjust amplitude.
Fine+LFO Phase = Fine adjust phase.
Fine+Depth/Latitude/Longitude/Browse = Navigate in tiny
steps.
Fine+Dispersion = Disperse in tiny steps.
Fine + FX button + Browse = Micro-adjust FX amount
(Sphere Recording mode)
Calibrate 1V/oct Jacks
Press Octave + Transpose. Buttons will turn blue.
Patch keyboard/seq. to Channel A's 1V/oct jack.
Play a C1 (1.00V) on the keyboard or sequencer.
Press Channel A's button (it will turn red)
Play a C3 (3.00V).
Press Channel A's button again (it will turn white).
Hold Browse knob down for 6 seconds to save.
Optionally can repeat for each channel separately (and
Transpose).
Full Manual PDF
Tutorial Videos
Firmware Updates
https://4mscompany.com/SWN