4ms Company Spherical Wavetable Navigator Cheat Sheet - Page 4
Browse online or download pdf Cheat Sheet for Synthesizer 4ms Company Spherical Wavetable Navigator. 4ms Company Spherical Wavetable Navigator 4 pages. Channels, vcos, navigation
Print PageSpheres Color Chart (Inner Light Ring)
Browse
Sphere
Spheres (factory)
Harmonics
Sine Distortions
Formants 1
Formants 2
Morphing Cello
Talkative FM
Distorted FM
909 Hits
Wavefolded Rings
Smooth Troughs
Alias Maximizer
Sine Sequences
Clearing/Resetting
Load a Blank Preset = Reset Everything
Turn the Preset knob to select a slot whose light is off. Tap the Preset
knob twice quickly to load the blank preset.
Clear/Reset LFOs
Press Preset + LFO Speed: Resets all speeds to 1Hz.
Press Preset + LFO Shape: Resets all shapes to Ramp-down.
Press Preset + LFO Shape + LFO Speed (2 seconds): Resets all LFO
settings.
Press LFO Speed + LFO Shape: Syncs LFO Phases by toggling
between in-phase and sequenced phase (each channel offset 60°).
Clear/Reset Oscillators
Press Preset + Transpose: Resets all transpositions and spread.
Press Preset + Fine + Transpose: Resets all fine tuning and detuning.
Press Preset + Octave: Resets all channels to the same octave.
Press Preset + Depth + Latitude: Resets all navigation.
Undo Load/Save/Clear Preset
Press Fine + Preset to undo/redo last preset action.
Push + Turn Browse
= Select Spherical Wavetable
Spheres (user)
User Spheres 1-18
User Spheres 19-36
User Spheres 37-54
User Spheres 55-72
User Spheres 73-90
User Spheres 91-108
Fine Adjustments
+
Fine + Turn knob
= Micro Adjustment
Fine
Fine+Transpose = Fine-tune pitch by micro-tonal steps.
Fine+Spread = Detune spread: all channels detune in
different amounts.
Fine+LFO Speed = Adjust speed continuously instead of
integer dividers/multipliers.
Fine+LFO Gain = Fine adjust amplitude.
Fine+LFO Phase = Fine adjust phase.
Fine+Depth/Latitude/Longitude/Browse = Navigate in tiny
steps.
Fine+Dispersion = Disperse in tiny steps.
Fine + FX button + Browse = Micro-adjust FX amount
(Sphere Recording mode)
Calibrate 1V/oct Jacks
Press Octave + Transpose. Buttons will turn blue.
Patch keyboard/seq. to Channel A's 1V/oct jack.
Play a C1 (1.00V) on the keyboard or sequencer.
Press Channel A's button (it will turn red)
Play a C3 (3.00V).
Press Channel A's button again (it will turn white).
Hold Browse knob down for 6 seconds to save.
Optionally can repeat for each channel separately (and
Transpose).
Full Manual PDF
Tutorial Videos
Firmware Updates
https://4mscompany.com/SWN