4ms Company SCMBO Manuale del costruttore - Pagina 2
Sfoglia online o scarica il pdf Manuale del costruttore per Hardware del computer 4ms Company SCMBO. 4ms Company SCMBO 4. Shuffling clock multiplier breakout (expansion module for the shuffling clock multiplier) kit builder's guide for pcb v1.1
Stampa la paginaStep 2: Resistor Arrays
Insert and solder the 5 resistor arrays. Each array has a white dot on one end, which must go into the
hole that's boxed out on the PCB (towards the left, as shown in the photo).
• 10k isolated array, 8-pins x 3 (labeled 8B103G)
• 470k bussed array, 10-pins x 1 (labeled 10A474G)
• 330ohm bussed array, 10-pins x 1 (labeled 10A331G)
Step 3: Capacitors, header pins, trim-pot
Insert and solder the six green capacitors, the 16-pin header, and the trim-pot. The caps and header pins
may be orientated either way, and the trim-pot will only fit one way.
•
1000pF "102" capacitors x 6
•
10k trim-pot x 1
•
16-pin header x 1
Step 4: Pots and Switches
Insert the 5 pots and 2 switches, but DO NOT SOLDER YET.
There are two types of pots: the Linear taper has a detent in the center that you can feel when you turn
the shaft. The Audio taper has no detent.
•
Slip, Shuffle, PW: 10k Linear taper with center detent ("10 3B")
•
Rotate, Skip: 10k Audio taper without detent ("10 3A")
•
4x Fast, Mute: SPDT right-angle mount switches