aFe Power 440-401006-N Manuale di istruzioni - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per Automobile Accessories aFe Power 440-401006-N. aFe Power 440-401006-N 13. Heavy rate racing sway bar pillow mounts
Stampa la pagina
Sway Bar Arm Installation Procedure
Your Pfadt Series sway bars were shipped with the arms assembled onto the bar, but if
you have to remove and re-install the arms for any reason, follow this procedure.
Insert the installation tool into the end of the sway bar and use it to help align the splines
in the arm to the splines on the sway bar. On the front sway bar, the angle between the
dip in the bar and the slot in the arm for the pinch bolt should be roughly 90 degrees.
On the rear sway bar, the angle between the dip in the bar and the slot in the arm should
be roughly 55 degrees.
Align the pinch bolt hole with the groove in the splines on the end of the bar and install
the pinch bolt. Torque to 18 N-m (13 ft-lbs).
Front Pinch Bolt
Repeat this procedure for the other side. It is helpful to place the bar and arms on a flat
surface to help index the arms from side to side. Some amount of misalignment is typical
and is not a concern. This misalignment will be accounted for with the adjustable end
links.
4
Installation Tool
Installation Tool
Rear Pinch Bolt
00P-0T1027-A