Gage Bilt GB715 Manuale di installazione - Pagina 3
Sfoglia online o scarica il pdf Manuale di installazione per Strumenti per rivetti Gage Bilt GB715. Gage Bilt GB715 17.
Anche per Gage Bilt GB715: Manuale di istruzioni originale (20 pagine)
Stampa la pagina
WARNING:
Any other use is forbidden.
The GB715 is a pneumatic-hydraulic tool designed specifically for the efficient installation of a wide range of blind rivets. It weighs
3.80 lbs. (1.7 kg) and can be operated in any position with one hand. It has a 1.200" (30.5 mm) rivet setting stroke and a rated pull
load of 1400 lbs. (6.2 kN) with 90 psi (6.2 bar) air pressure at the air inlet.
The GB715 riveter operates on 90 to 100 psi (6.2-6.9 bar) Max. providing the maximum efficiency. At 90 psi (6.2 bar) air pressure, the
GB715 does not exceed 81.5 dB (A) and consumes 3 cfm at 20 cycles a minute.
The air inlet is provided with 1/4-18 female pipe threads to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (SEE PAGE 16).
WARNING:
Do not operate in an explosive atmosphere.
The GB715 can be operated between 0ºF — 118ºF
GB715 S/N: 1242 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Weight
- 3.80 lbs. (1.7 kg)
Air pressure req'd
- 90-100 p.s.i. (6.2-6.9 bar) Max.
Air consumption
- .16 SCF/cycle (4.53 L/cycle)
Hydraulic oil
- Automatic Transmission Oil,
Setting stroke
- 1.200" (30.5 mm)
Rated pull load
- 1,400 lbs. (6.2 kN)
Noise level
- 81.5 dB (A)
Vibration
- Tested– No Hazards Found
Dexron III®, or equivalent.
3
REV. 2/16