Affinity Clearly Filtered Manuale di avvio rapido - Pagina 8
Sfoglia online o scarica il pdf Manuale di avvio rapido per Sistemi di filtrazione dell'acqua Affinity Clearly Filtered. Affinity Clearly Filtered 14. 3 - stag e u n d e r- s i n k f i ltr ati o n syste m
STEP 2
PREP
1
Turn on your faucet so a steady stream of cold water
flows into the sink.
2
Use a flashlight or headlamp to locate the 2 water
valves under your sink.
3
Place a bucket or towel below the valves.
STEP 3
SHUT OFF COLD WATER SUPPLY
1
Locate the cold water valve. It is typically the valve
on the right and can sometimes be identified by a
blue handle.
2
Shut off the cold water supply by turning the valve's
handle or knob clockwise until tight.
3
After you've shut off the cold water supply, turn off
your faucet.
13
STEP 4
CONNECT FILTER TO WATER LINE
Refer to the diagram on the front of the bracket to guide you during the following steps.
1
Disconnect the cold water line from the water valve
by twisting with your hand or a wrench.
2
Connect the stainless-steel hose attached to the
filter's 'inlet' end near filter cartridge 1 (female
fitting) to the water valve (male fitting). Tighten with a
wrench to create a seal.
3
Connect the stainless-steel hose attached to the
filter's 'outlet' end near filter cartridge 3 (male fitting)
to the water line (female fitting). Tighten with a
wrench to create a seal.
14