DYNACO DYNALOGIX II DY 4000 Manuale elettrico - Pagina 4

Sfoglia online o scarica il pdf Manuale elettrico per Controllore DYNACO DYNALOGIX II DY 4000. DYNACO DYNALOGIX II DY 4000 14.

D ff{mo

2.0

DY 4000

Setting Limits

Confirm all electrical connections are properly wired and terminated before power up.

Reference: Wiring Diagram that came with DYNAGO Door.

Setting Limits on Initial Power-up

Automatic activation's should be disconnected prior to setting limits. lf connected

door may activate and injury or damage may occur.

1. On initial power up the DY4000 will blink SET LIMITS on the display.

2. Press and hold both PROGRAM buttons until display changes to Password.

After display changes, release buttons. See figure: 2.0-1.

Press and

hold

PROGRAM

button until

display

changes to:

Figure 2.0-1: Entering Program Mode

3. Press and release the red arrow buttons to scroll to 562.

Note: On initial start up the Password screen will be bypassed, and will

directly enter the LimitSet screen.

Note: Password number will be stored for 4 minutes after initially entering.

Entering program mode during this time will not require reentry of

oassword number.

4. Press and release the Enter button. Display should change to: LimitSet.

See figure 2.0-2.

Press and

release the

Enter button.

Display

should

change to:

Figure 2.0-2: Enter Button

@-#i'@r

@ A

o P E N

c L o s E l

DYNACO USA, INC,

?tp ^4ea*r caDaaz Sa/oft4 &Dea,ey