DYNACO DY 4000 Manuale elettrico - Pagina 10
Sfoglia online o scarica il pdf Manuale elettrico per Pannello di controllo DYNACO DY 4000. DYNACO DY 4000 12.
Stampa la pagina
Manual & Automatic Close Timers
4.2
Setting AC/LOOP Timer
DYNACO USA, INC,
Note: If value is set to zero, the timer is deactivated and the activations put on
terminal number 2 is now in manual operation.
1. Press and release AC/LOOP timer button on the Dynalogix II controller.
The display will change to: AC Delay_Timer=##. See figure 4.2-1.
RUN
TIMERS
OPEN
JOG
UP/RESET
JOG
MC/PB
DOWN
CLOSE
TIMERS
MENU
Figure 4.2-1: AC/LOOP Timer
2. Use the Up and Down arrow buttons to change the countdown time to the
desired duration. The Dynalogix II will automatically save any changes that
are made. See Figure 4.2-2.
RUN
TIMERS
OPEN
JOG
UP/RESET
JOG
MC/PB
DOWN
CLOSE
TIMERS
MENU
Figure 4.2-2: Raise/Lower AC/LOOP Timer
Note: AC/LOOP timer is also used when the reversing edge is triggered
Note: If value is set to zero door will come down after it reaches the open limit.
CLOSE
PROGRAM
AC/LOOP
ENTER
CLOSE
PROGRAM
AC/LOOP
ENTER
The Leader in Door Safety & Design
9
AC/LOOP
Timer
MESSAGE DISPLAY / COUNTER
AC Delay
Time=##
Increase
Setting
Decrease
Setting