GREAT PLANES MASTER CADDY Manuale di istruzioni per il montaggio - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Strumenti di misura GREAT PLANES MASTER CADDY. GREAT PLANES MASTER CADDY 15. With auxiliary power station
Stampa la pagina
TOOLS NEEDED FOR ASSEMBLY
@
'"Thick'' C/A Glue or 5 - 15 Minute Epoxy
@
''Thin'' C/A Glue
@ C/A Accelerator Spray
@
Sanding block
@
Several Grades of Sandpaper (80, 120, 220)
@ Drill and Bits ( 5/64", 1/8", 1/2")
@ Pen or Pencil
@
Screwdriver
@
Modeling Knife
@ Masking Tape
@
Scissors
FINISHING MATERIALS
@ Small Can of Wood Filler
@
Small Can of Wood Sealer (Polyester Resin,
Coating Epoxy, Clear Polyurethane etc.)
@ Paint (Epoxy or Polyurethane) or Wood
Stain
Thinner for the Paint or Stain
400 Grit sandpaper
Brushes and Mixing Cups if Needed
CONSTRUCTION
MAIN CADDY
Note:
if you are going to use a natural wood
stain on your MASTER CADDY, be very careful
when applying glue during construction. The stain
will not penetrate the wood where glue has been
applied or spilled and it will leave a discolored spot.
CO 1. Sand the edges ofthe pieces shownin the follow-
ing sketch to a rounded shape similar
to the cross section shown at the right.
T
The sketch in the next column has
|
arrows pointing to the edges to sand.
These edges will be exposed on the
completed field box and should be
sanded to prevent splinters and to look
nice.
Uprights
2 req.
[snert Dicer 3|
Divider
B
Ki
ye on
Shelf
Divider
A
=
=
h
=
APS Side B
C 2. Trial fit side A in place on the bottom. Line up
the edge of side A with the comer of the bottom as shown
in the photo. Use one of the uprights to hold it perpen-
dicular. When familiar with the positioning of the side,