GREAT PLANES MASTER CADDY Manuale di istruzioni per il montaggio - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Strumenti di misura GREAT PLANES MASTER CADDY. GREAT PLANES MASTER CADDY 15. With auxiliary power station
Stampa la pagina
remove it and apply a generous bead of glue along the
bottom groove in side A. Replace the side and allow the
glue to cure.
If you are using C/A, a spray of C/A
Accelerator will speed up the process.
O 3. Apply a bead of glue along the joint to help
strengthen the assembly. Do not get any glue on the
upright yet.
O 4.
Use one of the larger pieces such as the APS
front to position the upright perpendicular to side A.
Draw a line on the bottom along the edge of the upright.
o 5. Remove the positioning piece and draw a line
along the other bottom edge of the upright.
ett
Nin
C 6. Apply a generous bead of glue in the groove and
between the two lines you just drew. Position the upright
in place and allow the glue to cure. This upright will be
referred to as the "first upright".
es Sa
ae
O 7. Apply a bead of glue along both s
upright for extra strength.
ides of the
CO 8. Trial fit side B in place. Apply a generous bead
of glue along both grooves in side B and glue it in place.