GREAT PLANES MASTER CADDY 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} GREAT PLANES MASTER CADDY에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES MASTER CADDY 15 페이지. With auxiliary power station

remove it and apply a generous bead of glue along the

bottom groove in side A. Replace the side and allow the

glue to cure.

If you are using C/A, a spray of C/A

Accelerator will speed up the process.

O 3. Apply a bead of glue along the joint to help

strengthen the assembly. Do not get any glue on the

upright yet.

O 4.

Use one of the larger pieces such as the APS

front to position the upright perpendicular to side A.

Draw a line on the bottom along the edge of the upright.

o 5. Remove the positioning piece and draw a line

along the other bottom edge of the upright.

ett

Nin

C 6. Apply a generous bead of glue in the groove and

between the two lines you just drew. Position the upright

in place and allow the glue to cure. This upright will be

referred to as the "first upright".

es Sa

O 7. Apply a bead of glue along both s

upright for extra strength.

ides of the

CO 8. Trial fit side B in place. Apply a generous bead

of glue along both grooves in side B and glue it in place.