DaytonAudio MCWA60 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore DaytonAudio MCWA60. DaytonAudio MCWA60 4. 60 watt class d plate amplifier with wi-fi and bluetooth 4.0 aptx

Stampa la pagina

INTRODUCTION

Congratulations on your purchase of the Dayton Audio

MCWA60 is a feature-packed full range Class D plate amplifier that makes it easy to add high-quality Wi-Fi and AptX Bluetooth

4.0 wireless connectivity to your speakers. In addition to its wireless inputs, the MCWA60 features RCA, 3.5mm, and optical digital

inputs, plus a subwoofer output (LFE).

The MCWA60 is ideal for the project builder or OEM, with endless applications. Use the MCWA60 to build multimedia speakers,

powered monitor speakers, or even retrofit existing speakers! Each Wi-Fi module is serialized for easy identification when using

multiple plate amps, and each plate amp powers its host speaker plus an additional passive unit with up to 30 watts per channel.

ASSEMBLY

Select a mounting location for the MCWA60 amplifier module that allows the 30" speaker cable to easily reach the speaker or

crossover input terminals. The 30" lead is factory terminated with 0.205" disconnects for easy connection to speaker and crossover

terminals. Mount the MCWA60 amplifier module into a 3-3/4" (W) x 5-1/2" (H) cut-out in your cabinet, and bore an 11/16" diameter

hole to mount the IR target/BT/Wi-Fi pairing indicator PCB.

Internal

Speaker Lead

78cm/30.7"

Pairing

WiFi Plate

Note: For modeling use both 2D and 3D mechanical files are available for download of this plate amplifier.

INPUTS/OUTPUTS

The MCWA60 features a variety of input connections to suit a variety of needs:

OPTICAL – Connect an S/PDIF Toslink cable to this input. The

Toslink input supports PCM digital audio signals via an optical

cable and a high-quality AKM digital-to-analog converter.

AUX 2 – Connect a line-level or headphone-level signal to the

3.5mm AUX 2 input using a 3.5 mm to 3.5mm or 3.5mm to

RCA cable.

AUX 1 – Connect a line-level stereo audio signal to the AUX 1

input using quality RCA style cables.

SUB OUT – Connect a powered subwoofer to the SUB OUT

using a standard RCA style cable. The subwoofer plays content

below 80 Hz when connected; the speaker outputs remain

full-range.

MCWA60 60-watt plate amplifier with Wi-Fi and Bluetooth audio! The

FRONT

Files can be found on the daytonaudio.com website.

BACK

SPEAKER OUT – Connect a remote full-range speaker to

the SPEAKER OUT. Be sure and pay attention to positive

and negative polarity. The amplifier will provide up to 30

watts into a 4 ohm minimum impedance on this connection.

AC INPUT – Connect line power to the AC INPUT using

the included non-polarized "figure 8" style power cord. The

MCWA60 switch-mode power supply accommodates a full

range of operating voltages from 115/230V, and is double

insulated for use with non-grounded line cords.

POWER – Switch to the ON position when operating the

MCWA60 and the OFF position when the unit is not in use.

(2)

~30cm/11.8"