DaytonAudio MCWA60 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DaytonAudio MCWA60. DaytonAudio MCWA60 4 pagina's. 60 watt class d plate amplifier with wi-fi and bluetooth 4.0 aptx
Pagina afdrukken
INTRODUCTION
Congratulations on your purchase of the Dayton Audio
MCWA60 is a feature-packed full range Class D plate amplifier that makes it easy to add high-quality Wi-Fi and AptX Bluetooth
4.0 wireless connectivity to your speakers. In addition to its wireless inputs, the MCWA60 features RCA, 3.5mm, and optical digital
inputs, plus a subwoofer output (LFE).
The MCWA60 is ideal for the project builder or OEM, with endless applications. Use the MCWA60 to build multimedia speakers,
powered monitor speakers, or even retrofit existing speakers! Each Wi-Fi module is serialized for easy identification when using
multiple plate amps, and each plate amp powers its host speaker plus an additional passive unit with up to 30 watts per channel.
ASSEMBLY
Select a mounting location for the MCWA60 amplifier module that allows the 30" speaker cable to easily reach the speaker or
crossover input terminals. The 30" lead is factory terminated with 0.205" disconnects for easy connection to speaker and crossover
terminals. Mount the MCWA60 amplifier module into a 3-3/4" (W) x 5-1/2" (H) cut-out in your cabinet, and bore an 11/16" diameter
hole to mount the IR target/BT/Wi-Fi pairing indicator PCB.
Internal
Speaker Lead
78cm/30.7"
Pairing
WiFi Plate
Note: For modeling use both 2D and 3D mechanical files are available for download of this plate amplifier.
INPUTS/OUTPUTS
The MCWA60 features a variety of input connections to suit a variety of needs:
OPTICAL – Connect an S/PDIF Toslink cable to this input. The
Toslink input supports PCM digital audio signals via an optical
cable and a high-quality AKM digital-to-analog converter.
AUX 2 – Connect a line-level or headphone-level signal to the
3.5mm AUX 2 input using a 3.5 mm to 3.5mm or 3.5mm to
RCA cable.
AUX 1 – Connect a line-level stereo audio signal to the AUX 1
input using quality RCA style cables.
SUB OUT – Connect a powered subwoofer to the SUB OUT
using a standard RCA style cable. The subwoofer plays content
below 80 Hz when connected; the speaker outputs remain
full-range.
MCWA60 60-watt plate amplifier with Wi-Fi and Bluetooth audio! The
®
FRONT
Files can be found on the daytonaudio.com website.
BACK
SPEAKER OUT – Connect a remote full-range speaker to
the SPEAKER OUT. Be sure and pay attention to positive
and negative polarity. The amplifier will provide up to 30
watts into a 4 ohm minimum impedance on this connection.
AC INPUT – Connect line power to the AC INPUT using
the included non-polarized "figure 8" style power cord. The
MCWA60 switch-mode power supply accommodates a full
range of operating voltages from 115/230V, and is double
insulated for use with non-grounded line cords.
POWER – Switch to the ON position when operating the
MCWA60 and the OFF position when the unit is not in use.
(2)
~30cm/11.8"