DynaGen GSC400 Series Manuale dell'utilità di calibrazione - Pagina 13
Sfoglia online o scarica il pdf Manuale dell'utilità di calibrazione per Scheda madre DynaGen GSC400 Series. DynaGen GSC400 Series 18. For generator
Anche per DynaGen GSC400 Series: Manuale del programmatore (4 pagine)
Stampa la pagina
3. If the GSC400 is not already in the
RUN mode place the GSC400 in
the RUN mode and wait until AC
voltage reading stabilized.
Click OK.
The utility will then read the
generator voltage.
4. Finally click Next.
5. Out of the two AC currents
(loads) you picked for
calibration place the smaller
load on the generator and
measure the actual current.
Record the current in the utility.
Click Next.
13 of 18
Figure 9
Figure 10
Figure 11