Dynalabs DS-MS-20 Manuale del prodotto - Pagina 11
Sfoglia online o scarica il pdf Manuale del prodotto per Spruzzatore di vernice Dynalabs DS-MS-20. Dynalabs DS-MS-20 12. 20 n ms shaker
Stampa la paginaAll rights reserved. Reproduction or issue to third parties in any form whatsoever is not permitted without written authority from the proprietors.
3.4) Shaker Mounting
The shaker is designed to rest on its rubber isolators. However, these
isolators can be removed for rigid or semi-rigid mounting. If it is not
possible to bolt down the shaker, hot glue is also a good mounting option.
The shaker can also be suspended by elastic bungee cords for lateral testing.
Additional inertial weight may be attached to the bottom of the shaker using
hot glue.
3.5) Power Requirements
DS-MS-20 has an integrated power amplifier which is powered by its power
adaptor. Please note the output voltage and current ratings of the adaptor in
a replacement adaptor is to be used.
3.6) Cooling
DS-MS-20 does not require forced cooling. Air convection cooling is
sufficient for the force levels given in the specifications.
11