Dynalabs DS-MS-20 제품 설명서 - 페이지 11

{카테고리_이름} Dynalabs DS-MS-20에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalabs DS-MS-20 12 페이지. 20 n ms shaker

All rights reserved. Reproduction or issue to third parties in any form whatsoever is not permitted without written authority from the proprietors.

3.4) Shaker Mounting

The shaker is designed to rest on its rubber isolators. However, these
isolators can be removed for rigid or semi-rigid mounting. If it is not
possible to bolt down the shaker, hot glue is also a good mounting option.
The shaker can also be suspended by elastic bungee cords for lateral testing.
Additional inertial weight may be attached to the bottom of the shaker using
hot glue.

3.5) Power Requirements

DS-MS-20 has an integrated power amplifier which is powered by its power
adaptor. Please note the output voltage and current ratings of the adaptor in
a replacement adaptor is to be used.

3.6) Cooling

DS-MS-20 does not require forced cooling. Air convection cooling is
sufficient for the force levels given in the specifications.
11