Activeforever KA1000 Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Sveglia Activeforever KA1000. Activeforever KA1000 17. Dual alarm clock with wireless alarm monitoring receiver

Stampa la pagina

INSTALLATION

A. Dual Alarm Clock KA1000:

The best location to set the alarm clock KA1000 is next by the table lamp and close by

the telephone outlet in your bedroom. It also can be used in your living room or kitchen

where a lamp is available and be seen at many angles. Many KA1000 can be installed

at different locations as your desired. The Doorknock/Doorbell, the Telephone Ringer,

and the Baby Room Call transmitter are preprogrammed and when each triggers, the

alarm displays very clear the transmitter name as: "door", "PH", or "Baby". No more

confusion. No more mistaken. Follow these steps to install the alarm clock.

1. Remove the battery cover and install a 9V DC back up battery, then replace the

battery cover. (Fig 1.2 )

2. Set the alarm clock next to a table lamp. Turn the table lamp on before plugging

into the clock power cord. (Fig 2.3)

3. Plug the bed shaker to the unit and put it under the pillow. (Fig 2.2)

4. Connect the telephone module cord into the unit and plug the other end to tel

phone outlet. (Fig 2.1)

5. Plug the power cord to electrical outlet. (Fig 2.4)

FIG. 1.1

FIG. 1.2

B. Door Knock:

Hook the door knock on top of the door (Fig 3). Turn the door knock transmitter on.

Knock on the other side of the door to make sure it functioning properly.

C. Doorbell:

Clip the doorbell next by the doorknob is facing out. Press the button to test. (Fig 4.1

& 4.2)

FIG. 3

FIG. 2.1

Telephone Jack

Bed Shaker

FIG. 2.2

FIG. 4.1

- 8 -

FIG. 2.3

KA1000

Alarm Clock

FIG. 5.1

9V battery

FIG. 4.2

lamp

Turn the table

lamp on before

plugging into the

clock cord.

Electrical

Outlet

FIG. 2.4