Hiddn KryptoDisk 2 Manuale d'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso per Immagazzinamento Hiddn KryptoDisk 2. Hiddn KryptoDisk 2 17. Selfkey model
Anche per Hiddn KryptoDisk 2: Manuale di installazione rapida (2 pagine), Manuale d'uso (16 pagine)
Stampa la pagina2. First time use
This section contains instructions on how to set up the KryptoDisk 2 during first use. Before you can start using
the KryptoDisk 2, you must initialize (i.e. pair) the device and the user primary card (included), and format the
hard drive from your computer's operating system.
Unlike most other drives on the market, Hiddn's two-factor encryption products cannot be pre-formatted. This
is a security feature and a consequence of how the encryption module inside the KryptoDisk 2 is designed.
When you pair the KryptoDisk 2 with the user primary card, the data encryption key is transferred to the device
for the first time. That means that any pre-installed data (e.g. partition tables) would be unreadable. To be able
to use the KryptoDisk 2 with your computer, the KryptoDisk 2 therefore needs to be formatted upon first use.
When the KryptoDisk 2 is initialized and formatted, it is ready to be used with your preferred device.
Initialize the KryptoDisk 2 encryption module
1. Insert the user primary card in your KryptoDisk 2
2. Connect the device to your computer using the included USB cable
3. The device will prompt you to confirm initialization using the user primary card. Press the "9"-key followed
by the '#'-key to confirm.
4. Enter your PIN, do not unplug device.
5. Wait until the device prompts you to restart, then unplug the device from your computer
6. Connect the device to your computer again with the user primary card still inserted
7. The device will prompt you to enter a PIN code. The code can be found on the PIN/PUK card included with
the user primary and user data restore cards
The device is now initialized and successfully paired with the user primary card. Please note that if you insert
the user data restore card from this point onward, the user primary card will be invalidated, and you will have
to order a new set of cards.
Please contact
Initialize and format the KryptoDisk 2 hard drive
Before you can start using the KryptoDisk 2, the hard drive must be initialized and formatted. For instructions
on this step, please refer to section 9Error! Reference source not found..
Change PIN code
We strongly recommend that you change the pre-set PIN code. For instructions on this step, please refer to
section 8 - Admin menu.
KRYPTODISK 2 |
for purchasing new cards.
USER PRIMARY AND DATA RESTORE CARD
5