Hideaway Concelo CRL160D Istruzioni per l'installazione

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Elettrodomestici per lavanderia Hideaway Concelo CRL160D. Hideaway Concelo CRL160D 5.

Concelo Laundry CRL160D
Installation Instructions
Read all instructions before installing this bin unit.
Failure to install the bin correctly may void warranty.
INSTALLATION VIDEO:
NZ: hideawaybins.co.nz/concelo-laundry-installation
AUS: hideawaybins.com.au/concelo-laundry-installation
Or scan the QR code...
New Zealand
Australia
If predrilling using CNC refer to:
NZ: hideawaybins.co.nz/info/downloads
AUS: hideawaybins.com.au/info/downloads
for drilling position CAD files.
HIDEAWAY NEW ZEALAND
09 426 7456 / [email protected] / hideawaybins.co.nz
HIDEAWAY AUSTRALIA
1800 042 642 / [email protected] / hideawaybins.com.au
MEMBERS AND SUPPORTERS OF
Step 1 – Unpack carton
• The hamper and associated parts should be put to one side.
• Inner carton 1 contains collar components to be attached to the door panel.
• Inner carton 2 contains runners and mounting brackets to be mounted to the
cabinet carcase.
Step 2 – Mount collar to door panel
• Open Inner Carton 1 and follow the Concelo CRL160D Laundry Collar Assembly
Instructions within.
Step 3 – Mount runners inside cabinet carcase
• Open Inner Carton 2 and follow the Concelo CRL160D Laundry Runner Installation
Instructions within.
Step 4 – Assemble collar and door panel to runners
• Position collar assembly as shown in Fig 4. TIP: Ensure that runners are pulled
forward, there is a black tab at the front of the runner that can be pulled while
holding the door panel.
FIG.4
• Lower the door panel until a click is heard. TIP: The door panel may need to be
pushed down slightly.
• Close the product and check that it is approximately level. TIP: If the door panel
is significantly out of level it may indicate that it is not clipped down fully on
one side.
Step 5 – Adjust the door panel position
(Fig 5)
• Loosen the 6 door bracket bolts using the 4mm Hex key provided.
• Adjust the door to be square and parallel to carcase and in the correct vertical
position using the adjustment cams.
• Tighten the 6 door bracket bolts.
• Loosen the 6 door mounting screws and adjust the horizontal position of the
door panel.
• Tighten the 6 door mounting screws.
FIG.5
Step 6 – Fit the door bracket covers
(Fig 6)
FIG.6
Step 7 – Install internal tray
and hamper
(Fig 7)
FIG.7