AirDesign Le Slip Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Sport e attività all'aperto AirDesign Le Slip. AirDesign Le Slip 5.

To put your slip on, two options are available :

If the harness is opened, put the shoulder straps

and lift up the legs and waist strap between your

legs. Close all Red or Green loops together using

the carabiner. Insure the colors are not mixed

together. Ensure 3 loops are closing on each

carabiner.

If the harness is already closed, stepping through

the legs and waist straps might be more

convenient. One at a time, step through the legs

and waist straps before pulling the shoulder straps

into place. Make sure your legs go through the leg

straps correctly and not through the side of the

harness.

It is not recommended to use the step through method if you are using crampons or ski boots as you risk to severely

damage the harness. Instead use method 1 or remove the crampons before putting the harness on.

Warning! Ensure that the carabiner is going through the three

Red and Green loops on both sides before taking off.

Warning! Ensure that carabiners are locked and not twisted

before take off.

Your telescopic or foldable hiking poles can be stored

on the side using the loops and tankas during the

flight.

The back pocket can be used to store your light

carrying equipment during flight or ground handling,

or safety equipment permanently left there.

You seating position can be adjusted using the loop and ball on both side of the

harness (Pos 7 previous page).

Warning! Insure setting is symmetrical before take-off.

The legs can move freely by detaching the loop and ball

between the legs (Pos 6 previous page)

Warning! This impacts harness stabiliity.

Warning! Loop and ball shall be closed when using AD Front Rescue

Container.

AIRDESIGN – Le Slip Manual – V1.3 – August 7th 2020

USING YOUR HARNESS

Page 3/5