Dynamic Controls DX-ACC2 Manuale di installazione - Pagina 6
Sfoglia online o scarica il pdf Manuale di installazione per Unità di controllo Dynamic Controls DX-ACC2. Dynamic Controls DX-ACC2 7. Drive stop module
Stampa la pagina5
International Standards
Dynamic Controls products built today allow our customers' vehicles to conform
to national and international requirements. In particular to:
ISO7176-9
ISO7176-14
ISO7176-21
However the performance of controllers fitted to wheelchairs and scooters is very
dependent on the design of the scooter or wheelchair so final compliance must be
obtained by the vehicle manufacturer for their particular vehicle. No component
compliance certificate issued by Dynamic Controls relieves a wheelchair/scooter
manufacturer from compliance testing their particular vehicles.
User manuals should contain EMC warnings along the following lines:
Most electronic equipment is influenced by Radio Frequency
Interference (RFI). Caution should be exercised with regard to the use
of portable communications equipment in the area around such
equipment. While the manufacturer has made every effort to ensure
that RFI does not cause problems, very strong signals could still cause
a problem. If RFI causes erratic behaviour, shut the wheelchair off
immediately. Leave off while transmission is in progress.
4
- Climatic Tests for Electric Wheelchairs
- Power and Control Systems for Electric Wheelchairs
- Requirements and test Methods for Electromagnetic
Compatibility of Electric Powered Wheelchairs and
Scooters.
DX Drive Stop Module, March 2003