Automotive Tazer DT Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Automobile Accessories Automotive Tazer DT. Automotive Tazer DT 9. Programmer/light show

Set Backup Camera

Set Cargo Cam:

This will enable the "cargo cam" selector on the "controls" screen. Useful for front

cameras.

Set DVD_CD

This setting adds the CD input on the RA3/RA4 radio, for use as an aux input,

particularly useful if adding a media player or DVD player.

Set Travel Link:

This setting adds the ability to disable SiriusXM Travel Link, which turns off the

weather pop-ups. Also disables SiriusXM Traffic information.

Submenu Lighting– DRL and other lighting options:

Set DRL Location :

Choose which lights to use as DRL's (results vary with vehicle model) – Dedicated

DRL, SRT DRL's, Turns, Fogs, Hi beams or Low beams.

Set DRL Dropout:

This setting is enabled by default, making the DRL turn off when using a turn signal.

Turning this OFF will keep the DRL on even when a turn signal is in use.

Set Fog Lights Enable:

Set Fog Dropout:

This setting is enabled by default, making the Fogs turn off when using high beams.

Turning this OFF will keep the fogs on even when high beams are in use.

Set One Touch:

This setting is to disable or enable factory one-touch lane change setting.

Set Halo Enable:

This setting is to disable or enable factory Halos.

Set LED CMHSL:

This setting is to configure the vehicle for LED 3

Set LED Fogs:

This setting is to configure the vehicle for LED Fog lights.

Set LED Tails:

This setting is to configure the vehicle for LED 3

Set LED Front Turn:

Set Trailer Tow:

This setting is to configure the vehicle for trailer tow package.

Submenu Off-Road:

Set EPSteer: This setting is used if you deleted the factory electronic steering pump for a

hydraulic pump.

Set LOCKER: This setting is used if you deleted the factory axle lockers. You can delete front

only, or both. If the front locker is deleted then the front axle disconnect is deleted as well and

needs to be disabled as well.

: If factory backup camera is deleted, this setting will disable it.

If factory fog lights are added, this setting will enable them.

This setting is to configure the vehicle for LED front turn signals.

brake light.

taillights.