Agriweld Swath Roller Manuale dell'operatore - Pagina 13

Sfoglia online o scarica il pdf Manuale dell'operatore per Accessori per trattori Agriweld Swath Roller. Agriweld Swath Roller 17.

The swath roller is fitted with amber side marker lights as standard, however, it is not supplied
with the relevant 12-24V electrical plug which can vary, to suit the connection to your
tractor.
Please check that your LEDs are working correctly before use in the dark and especially
when in use on public roads. Please note that you are responsible for ensuring the LEDs are in
full working order before each use and this should form part of your routine maintenance
checks.
STANDARD FIXED AMBER LED SIDE MARKER LIGHTS
To connect your amber LED side marker lights, fitted as standard, you will need to
wire them up to a relevant 12-24 V electrical plug, suitable for your tractors electrical
OPTIONAL AMBER LED3DV FLASHING MARKER LIGHTS:
If ordered as an extra option, the amber flashing LED side marker lights are set to pattern PA1
before delivery. If you wish to change this, you will need to work your way down the list of
patterns following the instructions below before fitting the plug and connecting to the
tractor.
1. Using the
GREY
the flashing pattern.
2. Connect the
BROWN
3. Connect the BLACK wire to Earth (-NEGATIVE) on the battery.
4. Touch the
GREY
in the sequence.
5. Keep touching the
6. When happy you can fit your 12-24V plug using only the
and BLACK Earth (-NEGATIVE) wire.
7. Cut excess
GREY
contact.
CONNECTING YOUR LEDS
supply.
BLUE
WIRE = EARTH (NEGATIVE -)
BROWN
WIRE = LIVE (POSITIVE +)
wire to make the change you will need a 12V battery on hand to alter
wire to Live (+POSITIVE) on the battery.
wire once to Earth (-NEGATIVE) which will produce the next pattern
GREY
wire in this way until the desired pattern is achieved.
and
YELLOW
wires down to within the sheath to prevent further
BROWN
LIVE (+POSITIVE) wire
13