ADENDORFF MAC AFRIC SDRILC-024 Istruzioni per l'uso originali - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'uso originali per Martello rotante ADENDORFF MAC AFRIC SDRILC-024. ADENDORFF MAC AFRIC SDRILC-024 11. Cordless brushless rotary hammer

Stampa la pagina

GENERAL POWER TOOL SAFETY WARNINGS

(For All Power Tools)

WARNING! Read and understand all instructions.

instructions listed below may result in electric shock, fire and/or serious

personal injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Work Area Safety

Cluttered or dark areas invite accidents.

Keep work area clean and well lit.

2. Do not operate power tools in explosive atmospheres, such as in the presence of

Power tools create sparks which may ignite the dust or

flammable liquids, gases, or dust.

fumes.

3. Keep children and bystanders away while operating a power tool.

you to lose control.

Electrical Safety

4. Power tool plugs must match the outlet. Never modify the plug in anyway. Do not use any

adapter plugs with earthed (grounded) power tools.

outlets will reduce risk of electric shock.

5. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges

and refrigerators.

There is an increased risk o electric shock if your body is earthed or

grounded.

6. Do not expose power tools to rain or wet conditions.

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts.

cords increase the risk of electric shock.

8. When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

Failure to follow all

Distractions can cause

Unmodified plugs and matching

Water entering a power tool will

Damaged or entangled

9. If operating a power in a damp location is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

NOTE: The term "residual current device (RCD)" may be replaced by the term "ground

fault circuit interrupter (GFCI)" or "earth leakage circuit breaker (ELCB)".

Personal Safety

10. Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol,

or medication.

A moment of inattention while operating power tools may result in serious

personal injury.

11.

Use personal protective equipment. Always wear eye protection.

such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

12. Prevent unintentional starting. Ensure the switch is in the off-position before connecting

to power source and /or battery, picking up or carrying the tool.

your finger on the switch or energising power tools that have the switch on invites

accidents.

13. Remove any adjusting key or wrench before turning the tool on.

attached to a rotating part of the power tool may result in personal injury.

14. Do not overreach. Keep proper footing and balance at all times.

of the power tool in unexpected situations.

15. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and

Loose clothes, jewellery or long hair can be caught in

gloves away from moving parts.

moving parts.

16. If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used.

dust-related hazards.

Power Tool Use and Care

17. Do not force the power tool. Use the correct power tool for your application.

power tool will do the job better and safer at the rate for which it was designed.

18.

Do not use tool if switch does not turn it on or off.

Protective equipment

Carrying power tools with

A wrench or a key left

This enables better control

Use of dust collection can reduce

The correct

Any power tool that cannot be