Autonics PSQ-C01 Series Scheda tecnica - Pagina 2

Sfoglia online o scarica il pdf Scheda tecnica per Strumenti di misura Autonics PSQ-C01 Series. Autonics PSQ-C01 Series 14. Dual lcd display digital pressure sensor

Stampa la pagina

PSQ Series

Pressure and Max. Pressure Display Range

Type

MPa kPa

- -100.0 to 100.0

(-101.3 to 110.0)

Compound

pressure

- -100 to 1000

(-101 to 1100)

※ ( ) is Max. pressure display range.

Specifications

Gauge pressure (In case of fluid type, standard pressure are sealed gauge pressure

Pressure type

Type

NPN or PNP open collector output type

Model

PSQ-

Rated pressure range

-100.0 to 100.0kPa

Display&Setting

-101.3 to 110.0kPa

pressure range

Min. display unit

0.1kPa

Max.

Pneumatic type 2 times of rated pressure

pressure

Fluid type

3 times of rated pressure

range

• Pneumatic type: air, non-corrosive gas

Applied fluid

• Fluid type: air, non-corrosive gas and fluid that do not corrode stainless steel 316L

Power supply

12-24VDCᜡ (ripple P-P: max. 10%)

Allowable voltage range 90 to 110% of rated voltage

Current consumption

Max. 50mA

NPN or PNP open collector output

Control output

Load voltage: max. 30VDCᜡ

※ 2

Hysteresis

Min. display interval

Repeat error

±0.2% F.S. ± min. display interval

Response time

Select one; 2.5ms, 5ms, 10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1,000ms, 5,000ms

Protection circuit

Output short over current protection circuit

Voltage

output

Analog

※ 3

output

Current

output

※ 3

External input

(Auto shift/

Remote zero/Hold)

Display digits

Present value (PV) display part, setting value (SV) display part: 4-digit

Display method

12-segment LCD method

MPa

0.001

kPa

0.1

kgf/cm

0.001

Min.

bar

0.001

display

psi

0.02

interval

mmHg

inHg

0.1

mmH

0.1

Display accuracy

0 to 50℃: max. ±0.5% F.S., -10 to 0℃: max. ±1% F.S.

Insulation resistance

Over 50MΩ (at 500VDC megger)

Dielectric strength

1,000VAC 50/60Hz for 1min

Vibration

1.5mm amplitude at frequency of 10 to 55Hz (for 1min) in each X, Y, Z direction for 2 hours

Ambient temp. -10 to 50℃, storage: -20 to 60℃

Environ-

ment

Ambient humi. 30 to 80%RH, storage: 30 to 80%RH

Cable (fluid type)

Ø4mm, 5-wire, 3m (AWG24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm)

Protection structure

• Pneumatic type: IP40 (IEC standard)

• Pneumatic type - Front case: polycarbonate, rear case: polycarbonate, pressure port: brass-nickel plated

Material

• Fluid type - Front case: polycarbonate, rear case: polyamide 6, pressure port: stainless steel 316L

Approval

※ 4

Weight

• Pneumatic type: approx. 165g (approx. 80g)

※ 1: The unit is sealed structure. It is based on atmospheric pressure 101.3kPa.

※ 2: In hysteresis output mode, it is variable.

※ 3: Select one between analog output (voltage or current) and external input.

※

4: The weight includes packaging. The weight in parenthesis is for unit only.

※ For using mmH

O unit, multiply display value by 100.

※ Environment resistance is rated at no freezing or condensation.

G-10

kgf/cm²

bar

-1.020 to 1.020

-1.000 to 1.000

(-1.033 to 1.122)

(-1.013 to 1.100)

-1.020 to 10.20

-1.000 to 10.00

(-1.030 to 11.22)

(-1.01 to 11.00)

C01

PSQ-

-100 to 1,000kPa

-101 to 1,100kPa

1kPa

1.5 times of rated pressure 2 times of rated pressure

0.001

0.01

0.2

psi

-14.50 to 14.50

(-14.70 to 15.95)

-14.50 to 145.0

(-14.65 to 159.5)

※ For using mmH

O unit, multiply display value by 100.

NPN or PNP open collector output+

analog output or external input type

PSQ-

-100.0 to 100.0kPa

-101.3 to 110.0kPa

0.1kPa

Max. 50mA (analog output: max. 70mA)

Load current: max. 100mA

Output voltage: 1-5VDCᜡ ±2.5% F.S.

Linear: max. ±1% F.S.

Resolution: 1/2,000

Output impedance: approx. 240Ω

Response time: 50ms

Output current: DC4-20mA ±2.5% F.S.

Linear: max. ±1% F.S.

Resolution: 1/2,000

Output impedance: approx. 100kΩ

Response time: 50ms

ON voltage: max. 0.4VDCᜡ

OFF voltage: 5-Vin or open

Resolution: 1/2,000

Output impedance: approx. 100kΩ

0.001

0.1

0.001

0.02

0.1

• Fluid type: IP65 (IEC standard)

• Fluid type: approx. 210g (approx. 125g)

mmHg

inHg

-750 to 750

-29.5 to 29.5

(-760.0 to 825.1)

(-29.91 to 32.48)

-750 to 7500

-29.5 to 295

(-757.6 to 8251)

(-29.83 to 324.8)

※1

)

C01

U-

PSQ-

-100 to 1,000kPa

-101 to 1,100kPa

1kPa

1.5 times of rated pressure

Residual voltage: max. 2VDCᜡ

0.001

0.01

0.2

mmH

-102.0 to 102.0

(-103.3 to112.2)

-102.0 to 1020

(-103.0 to 1122)

U-