dynarex 12005 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature mediche dynarex 12005. dynarex 12005 9. Ltc 5 function ultra low bed

Stampa la pagina

ASSEMBLY INSTRUCTIONS

2.1 ASSEMBLING THE BED

The bed comes in with the sections (head board, foot

board, upper bed deck and lower bed deck) stacked.

Carefully lay each section on the fl oor.

2.2 ASSEMBLING THE HEADBOARD

AND FOOTBOARD

1. Position two long pieces of cardboard supports on

the fl oor shoulder width apart.

2. Carefully tilt the head board onto the cardboard

supports. Position the plastic actuator casing at

the lower center of the head board in between the

two supports.

Cardboard

supports

3. Rotate the head end bed deck vertically. Aligned

and slot the bed deck onto the head board. Secure

the assembly with two socket screws on each

side.

4. Tilt the assembly back on its foot.

5. Repeat the same procedure for foot board

installation.

(Continued)

2.3 ASSEMBLING THE BED DECK

1. With both the head and foot end assemblies

standing on their feet, align and join the two decks

together.

2. Secure the two decks together with two socket

screws on each side.

Long-Term Care Bed • D500 • 5 Function Ultra Low Bed (Reorder No. 12005)

ASSEMBLY INSTRUCTIONS

2.4 INSTALLING THE MATTRESS

RETAINING SYSTEM

1. Snap the mattress retainer onto the bed frame

and push it down fi rmly. The mattress retainers for

the sides will be longer than the ones for the bed

ends. Ensure the mattress retainer sits fl ushed

with the edge of the bed.

2. Repeat the procedure until all six mattress retain-

ers are installed. There should be one retainer on

either side of the bed and two on both ends of the

bed.

Long-Term Care Bed • D500 • 5 Function Ultra Low Bed (Reorder No. 12005)

(Continued)

2.5 INSTALLING THE HAND

PENDANT CLIP

Clip the hand pendant clip over the headboard and

push it down fi rmly.