dynarex 12005 Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Медицинское оборудование dynarex 12005. dynarex 12005 9 страниц. Ltc 5 function ultra low bed
Печатать страницуASSEMBLY INSTRUCTIONS
2.1 ASSEMBLING THE BED
The bed comes in with the sections (head board, foot
board, upper bed deck and lower bed deck) stacked.
Carefully lay each section on the fl oor.
2.2 ASSEMBLING THE HEADBOARD
AND FOOTBOARD
1. Position two long pieces of cardboard supports on
the fl oor shoulder width apart.
2. Carefully tilt the head board onto the cardboard
supports. Position the plastic actuator casing at
the lower center of the head board in between the
two supports.
Cardboard
supports
3. Rotate the head end bed deck vertically. Aligned
and slot the bed deck onto the head board. Secure
the assembly with two socket screws on each
side.
4. Tilt the assembly back on its foot.
5. Repeat the same procedure for foot board
installation.
6
(Continued)
2.3 ASSEMBLING THE BED DECK
1. With both the head and foot end assemblies
standing on their feet, align and join the two decks
together.
2. Secure the two decks together with two socket
screws on each side.
Long-Term Care Bed • D500 • 5 Function Ultra Low Bed (Reorder No. 12005)
ASSEMBLY INSTRUCTIONS
2.4 INSTALLING THE MATTRESS
RETAINING SYSTEM
1. Snap the mattress retainer onto the bed frame
and push it down fi rmly. The mattress retainers for
the sides will be longer than the ones for the bed
ends. Ensure the mattress retainer sits fl ushed
with the edge of the bed.
2. Repeat the procedure until all six mattress retain-
ers are installed. There should be one retainer on
either side of the bed and two on both ends of the
bed.
Long-Term Care Bed • D500 • 5 Function Ultra Low Bed (Reorder No. 12005)
(Continued)
2.5 INSTALLING THE HAND
PENDANT CLIP
Clip the hand pendant clip over the headboard and
push it down fi rmly.
7