activTek EAGLE 5000 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria activTek EAGLE 5000. activTek EAGLE 5000 16. Electronic air purification system 100, 120, 220, and 240 volt systems

Stampa la pagina

SETTINGS AND ADJUSTMENTS

1. FAN CONTROL

The disbursement of cleansing properties is best accomplished with good air circulation .

The fan control should be set as high as reasonably possible without creating an

undesirable noise level . This will be determined by personal preference and the distance

you wish the cleansing properties to be dispersed .

Note: A ceiling fan can also aid in distribution of cleansing properties.

2. PURIFIER CONTROL

PURIFIER Control: Set the control at the nine o'clock position for one hour .

Adjust the control up or down after one hour based on the following criteria:

1 . In normal conditions, it is not necessary to turn the PURIFIER control indicator above

the area of the environment . (refer to purifier chart on page 7)

2 . Keeping in mind the previous statement (#1), adjust the purifier so that the scent of

ozone fades into the background 15-30 seconds after entering the environment .

3. AWAY MODE FEATURE

For maximum effectiveness in reducing air contaminants, turn the unit on high for 3-4

hours .

Caution: Always be sure a room or area is

UNOCCUPIED before performing the above

described Away Mode procedure.

Air out room by opening doors and/or windows .

4. ION CONTROL

The normal setting of a DC ionizer is full negative . This

setting seems to work best in removing particulate

(cigarette smoke) as well as reducing static . When

trying to reduce static, if the full negative setting

results in more static, turn the ion control in small

increments towards the positive until the static is

relieved .

Purifier Control

Ion Control

Fan Control