activTek EAGLE 5000 Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria activTek EAGLE 5000. activTek EAGLE 5000 16. Electronic air purification system 100, 120, 220, and 240 volt systems

Stampa la pagina

MAINTENANCE

Periodic maintenance is required to ensure that the Eagle 5000 operates properly . A

severely polluted environment can foul a purification plate in as little as two weeks or as

long as a year . Shown here are basic maintenance procedures that should be carried out

to keep your unit running at top performance .

Rear lint screen/carbon filter cleaning (see page 6 for removal instructions):

You have two options to clean the lint screen and carbon filter:

• When visibly dirty, simply remove the lint screen or carbon filter . With a hand-held

vacuum, remove the heavy particulate from the screen . This method will extend the life

of the screen/filter .

- OR -

• When visibly dirty, remove the lint screen or carbon filter from the unit . Wash in hot

water, brushing gently with a toothbrush to remove particulate . Allow to dry completely

prior to reinstalling the lint screen .

Plate Card Cage

Also be sure to clean the stand-offs at the corners of the

plate card cage (A cotton swab with alcohol works well) .

Fan Blade and Front Grill

Wipe off fan blade and front grill (if dirty) with a damp

washcloth . The fan requires no maintenance (with the

exception of the first time it is used, when it may be

necessary to give it a gentle push to get it started) . If the

fan squeaks, a drop of lightweight oil may be needed on

the fan shaft .

purification plate

Remove the rear lint screen (page 6) .

Carefully remove the purification plates

(a, b, c) .

Clean the plates (a, b, c) with equal

parts hot water and ammonia . Dry

completely using a hair dryer if

necessary . Reinstall plates (page 7) . Be

sure to check that the electrical tabs are

in contact with the plate .