activTek INDUCT 2000LV Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria activTek INDUCT 2000LV. activTek INDUCT 2000LV 17. Electronic air purification system

Stampa la pagina
activTek INDUCT 2000LV Manuale d'uso
CONGRATULATIONS . . .
on your purchase of an InDuct 2000 LV air
purification enhancement system. This unit
is designed to be installed into an existing
HVAC system. Please read and follow all service
procedures outlined in this manual. Use only
genuine activTek replacement parts available
from your Distributor.
If you have any questions concerning this or any
activTek product, contact your Distributor.
Please record the name and phone number of
your activTek Distributor:
Name __________________________________
Phone _________________________________
Please record the serial number of your InDuct
2000 LV:
Serial # _________________________________
Features:
Ozone Production:
• 0.02 ppm maximum with standard
replaceable ActivePure® Cell.
• 0.00 ppm with ozone-free
replaceable ActivePure® Cell.
Electrical:
• 18-32VAC ~50/60Hz
• Current: 1.0A,
• Power Factor: 0.99
• Power: 18 Watts
Mechanical:
• Distribution via air handler.
Dimensions:
• 8.5" x 8.5" x 11"
(21.59cm x 21.59cm x27.94cm)
• Weight: 3 pounds (1.2 kg.)
Operating Temperature:
• 32-120°F
Coverage:
• Up to 2000 ft
(186 m
)
2
2
Warranty:
• Limited 3 years.
2
CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About Induct 2000 LV . . . . . . . . . . . . . . . . . . 2
Product Contents. . . . . . . . . . . . . . . . . . . . . . . 3
Installation Hardware. . . . . . . . . . . . . . . . . . . 3
Replacement Parts . . . . . . . . . . . . . . . . . . . . . 3
Recommended Installation Tools. . . . . . . . 3
Installation Requirements. . . . . . . . . . . . . . . 4
Metal Ductwork Installation . . . . . . . . . . . . 5
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the ActivePure® Cell . . . . . . . . . 13
Changing the Ballast . . . . . . . . . . . . . . . . . . 14
This owner's manual is also available online at:
http://www.activTek.net.
InDuct 2000 LV by activTek is easily mounted into
the supply side of air conditioning and heating
system air ducts where many problems can start.
Optional ozone-free units are available with the same
basic components and an ozone-free bulb. Note that
odor reduction is dependent on low level ozone. The
InDuct 2000 LV provides 0.02 ppm or less of ozone. If
odor reduction is required, the standard ActivePure®
Cell is recommended.
WARNING! - UV Light in operation.
Disconnect unit from power supply before
servicing. Failure to follow warnings may
result in severe eye damage and electrical
shock.
Location for Protective Earth Line.
WARNING! - To prevent damage
to the unit, operating environment
temperature must never exceed 120˚F.
WARNING! - This unit must be installed
by a licensed HVAC contractor. Failure to
do so will void warranty of the product.
WARNING! - This unit must never be
used with an extension cord.
WARNING! - Do not connect this unit
to any voltage source above 32 volts.
Doing so will cause damage to the unit.
PRODUCT CONTENTS
RESIDENTIAL HVAC AIR PURIFICATION SYSTEM
Replaceable ActivePure®
Cell (includes UV Lamp)
activTek INDUCT 2000 LV
24 volt, Item # 00000000
UV bulb indicator
HG-LAMP CONTAINS MERCURY. Manage in
accordance with disposal laws: www.lamprecycle.org.
INSTALLATION HARDWARE (SUPPLIED)
activTek Environmental, 300 East Valley Dr., Bristol, VA 24201, www.activTek.net
(8) #8 - .75
(4) #6 - 32 X 2 inch
1/4" Self-tapping screws
Threaded bolts
Item # US70679
Item #US70680
REPLACEMENT PARTS
ActivePure® Cell
Item # US70678
• Ozone-Free ActivePure® Cell
Item # US71088
• Ballast
Item # 9950102
• Power Cord
Item # 9950103
RECOMMENDED INSTALLATION TOOLS
3 1/2" Hole Saw
Drill/Power Driver
Phillips
for wood or metal
(recommended)
Screwdriver
You may also need:
Utility Knife
Tin Snips
(for metal ductwork)
Mounting
Power
Plate
Cord
Safety
Switch
(4) #6 - 32
Toggle bolt wall anchors
(4) #8 - 32
Item # US70682
Hex nuts
Item # US70681
3/8" Drill Bit
11/32" Open-
(if installing into fiberglass
ducting with toggle bolts)
End Wrench
CAUTION: When the unit is
installed in a roof mounted
HVAC system, the unit must be
protected from the elements.
Dust Mask
Base Unit
1/4
1/4" Nut Driver
Bit
3