activTek OzoneBlaster Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Pulitore d'aria activTek OzoneBlaster. activTek OzoneBlaster 12. Electronic air purification system

MAINTENANCE

OZONE PLATE

Carefully remove the plates (a & b) from the card cage

by grasping the middle of the edge nearest to you and

slowly pulling straight out .

If you are in an environment where there are fats, oils, or grease, such as in a kitchen, start

cleaning with denatured alcohol and a soft bristle brush . This will cut the grease without

leaving a residue .

PLATE CARD CAGE

Also be sure to clean the stand-offs at the corners

of the ozone plate card cage . (A cotton swab with

alcohol works well . )

FAN BLADE AND FRONT GRILL

Wipe off fan blade and front grill if dirty with damp

washcloth . The fan requires no maintenance (with

the exception of the first time it is used, when it

may be necessary to give it a gentle push to get it

started) . If the fan squeaks, a drop of lightweight

oil may be needed on the fan shaft .

(CONTINUED)

For all applications - Clean with 50% ammonia and 50%

water to remove contaminates . Put the plate(s) into a

shallow dish and pour enough mixture into the dish to

just cover plate(s) . Allow the plate(s) to soak for 10-20

minutes . Remove and scrub with a soft bristle brush . Rinse

thoroughly . Let air dry for 24 hours or use a blow dryer to

dry thoroughly .