Autool CT-200 Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Apparecchiature di servizio Autool CT-200. Autool CT-200 18. Injector cleaner & tester
Anche per Autool CT-200: Manuale d'uso (14 pagine), Manuale d'uso (14 pagine)

Autool CT-200 Manuale
a. Select the suitable coupler④ and "O" loop③, and then put the "O" loop
on the coupler. (Put a little lubricant on the coupler and the "O"loop.)
b. Put the injector⑨ into the coupler, and then put them together into the
fuel distributor⑥.
c. Install the hold plate②. Tighten the screw⑤ on the hold plate. Adjust
the suitable height by screw④.
d. Install the fuel distributor and injector to the fuel distributor rack⑦.
e. Connect the adaptor of black hose with the male terminal⑧ on the fuel
distributor. Connect the drive wire of injector, and prepare to test.
3.2.2 Steps

02 Idle Speed Test

1) Connect black hose (outlet) to inlet port of the fuel distributor, and
then connect the actuation cable to the machine.
2) Press Left or Right Arrow key to select Idle Speed Test, then press RUN
1
2
3
4
5
6
7

Installation Diagram

- - 6 - -
9
8